113,35 zł

Prince: Inside the Music and the Masks GRIFFIN

Książki / Literatura obcojęzyczna

In his three decades of recording, Prince had nearly thirty albums hit the Billboard Top 100. He is the only artist since the Beatles to have a number-one song, movie, and single at the same time. Prince's trajectory-from a teenage unknown in Minneapolis to an idol and Rock and Roll Hall of Famer-won him millions of adoring fans the world over.Prince is the first book to give full treatment to his thirty-five-year career. Acclaimed music journalist Ronin Ro traces Prince's rise from anonymity in the late 70s, to his catapult to stardom in the 80s, to his reemergence in the twenty-first century as an artistic icon. Ro expertly chronicles his music and career, showing how Prince and his albums helped define and inspire a generation. Along the way, Prince confronted labels, fostered other young talents, and took ownership of his music, making a profound mark on the entertainment industry and pop culture.A new introduction and chapter cover the last five year's of Prince's life and work and his untimely death in April 2016.

Sklep: Libristo.pl

165,31 zł

Penguin Book of Greek and Latin Lyric Verse Penguin Books

Książki / Literatura obcojęzyczna

Composed between the early-agricultural 'song culture' of 800 BCE, when praise poems and dirges mingled in a world peopled with gods and monsters, and the time of Imperial Rome, the corpus of Greek and Latin lyric poetry is as densely rich in formal interrelation and allusion as anything we know in English verse. Poets like the Greek Callimachus and the Roman Horace self-consciously modelled themselves on earlier bards - Sappho and Mimnermus, Pindar and Alcaeus - and produced poetry thick with references and resonances from the work of their exemplars. Yet, as a rule, for the reader in English translation, much of this fascinating interplay is inaccessible. One translator approaches a given poet in one way; another translator approaches the next poet in another. We receive the part, but lose the whole.In an undertaking of astonishing ambition, Chris Childers has sought to remedy this situation by translating the most representative and significant poems from both languages in a single volume, and according to consistent principles of translation. No other book now available so much as attempts this. A decade in the making, The Penguin Book of Greek and Latin Lyric Verse gives us back the full complexity and play of two immortal traditions as we have never seen them before.

Sklep: Libristo.pl

196,00 zł

Phobya CPU-Cooler UC-2 LT AMD 939/AM2/AM3 - Black Edition Phobya

kategoria nadrzedna nie istnieje

The new CPU water block from Phobya - a masterpiece of technology!  This water block truly deserves its name: "Phobya Ultra Cooling, version one", or short UC-2 At the core of the Phoby UC-2 lies a new middle layer, based on the patented micro channel recirculation technology which was already successful in the UC-2's predecessor. Further developement of this design for use with a slot structure in the cooling plate allowed the creation of a CPU water block which plays amongst the best on the market. Not only excellent cooling performance, but also outstanding design and quality make the water block unique and innovative. Technical aspects:  A protective foil protects the polished underside of the water block. Please remove this foil before installation! 56x56mm in site, the cooling plate features an extremely fine slot structure which is one of the most advanced on the market. 68 cooling channels fill a surface area of 35 x 31.3mm, each only 0.2mm wide. The fins in between the slots also have a thickness of only approx. 0.2mm. Above the slot structure, an approx. 1mm thick middle plate is inserted. It serves two purposes: 1: In the middle an injection slot is placed, perpendicularly directing the coolant collected from the inlet chamber into the cooling channels 2: At the bottom of the middle plate coolant recirculation channels are implemented. These channels increase flow rates and create mico-turbulence caused by cross-flow, further increasing cooling performance A wide array of tests was conducted to determine the one design whichlead to the ideal result. Width, length and number of injection slots were variied until the desired result was achieved. An innovative coolant drain system rounds off the design of the water block, featuring two recirculation channels from the outlet collection chamber to the outlet.  For maximum fitting compatibility, the connection threads are spaced 23mm apart (center to center), even allowing the use of tubing with an outer diameter of 16mm! As a result of this well-rounded and innovative design, the Phobya UC-2 achieves sensational cooling performance on single-, dual-, quad- and even hexa-core CPUs! Optical aspects:  The black gloss design was further improved and now comes in a more elegant version. Besides the black glossy top plate, both mounting plate and screws are now completely black. Laser engraving on the top plate marks In- and outlet with arrows. Two versions of the water block are available, one compatible with AMD and one with Intel. Versions:  In the "Extreme" version (Art. 10423), this water block unleashed the full potential of the ciro channel recirculation technology. A full metal top improves both haptic quality and makes additionally increased performance possible. The UC-2 Extreme version gives a maximum of performance and is perfect for extreme overclocking. If you are looking for the most from your system, this water block is ideal for you. The "LT" versions (Art. 10424) allows affordable entrance into the high-performance sector, with a performance only 2-3K below the "Extreme" version (tested on a Core i2970K quad core CPU). TOP-performance with an affordable pricetag - that is the LT version! Technical specifications:  Material water block: Copper, plastic Material mounting plate: Aluminium   Dimensions Intel version: 105 x 62 x 15mm  Weightt: 215g Connection thread size: G1/4

Sklep: Soft-PC.pl

479,00 zł

EK Water Blocks EK-FC7970 Matrix - Acetal+Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

Product Description. EK-FC7970 Matrix is a high performance full-cover water block, engineered specifically for ASUS design Radeon HD 7970 Matrix series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC7970 Matrix water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M2.5x4- & M2.5x6 DIN7985 screws, factory provided backplate can be re-used. EKWB also encloses two-slot I/O bracket which replaces the original three-slot, in order to make installation of mutliple graphics cards easier. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC7970 Matrix water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC7970 Matrix series water block - EK-FC7970 DCII 2-slot I/O bracket - mounting mechanism with screw-in brass standoffs - thermal pads Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance.  

Sklep: Soft-PC.pl

389,00 zł

EK Water Blocks EK-FC770 GTX EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC770 GTX is a high performance full-cover water block for nVidia reference design GeForce GTX 770 series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC770 GTX water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer.   Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan SE Backplate - Black) which improves the looks of your graphics cards. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC770 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC770 GTX series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included. - Water block ports' aligns with the EK-FC Titan SE as well as EK-FC Titan Additional Information. Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

389,00 zł

EK Water Blocks EK-FC770 GTX - Acetal EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC770 GTX is a high performance full-cover water block for nVidia reference design GeForce GTX 770 series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC770 GTX water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer.   Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan SE Backplate - Black) which improves the looks of your graphics cards. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC770 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC770 GTX series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included. - Water block ports' aligns with the EK-FC Titan SE as well as EK-FC Titan Additional Information. Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

429,00 zł

EK Water Blocks EK-FC770 GTX - Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC770 GTX is a high performance full-cover water block for nVidia reference design GeForce GTX 770 series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC770 GTX water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer.   Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan SE Backplate - Black) which improves the looks of your graphics cards. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC770 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC770 GTX series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included. - Water block ports' aligns with the EK-FC Titan SE as well as EK-FC Titan Additional Information. Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

439,00 zł

EK Water Blocks EK-FC770 GTX - Acetal+Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC770 GTX is a high performance full-cover water block for nVidia reference design GeForce GTX 770 series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC770 GTX water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer.   Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan SE Backplate - Black) which improves the looks of your graphics cards. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC770 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC770 GTX series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included. - Water block ports' aligns with the EK-FC Titan SE as well as EK-FC Titan Additional Information. Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

435,55 zł

EK Water Blocks EK-FC780 GTX Classy - Acetal+Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC780 GTX Classy is a high performance full-cover water block engineered specifically for EVGA design GTX 780 Classified series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC780 GTX Classy water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC780 GTX Classy Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC780 GTX Classy water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC780 GTX Classy series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Fittings are not included! Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Water block ports does not align with any other EK-FC water block. Additional Information. Option Nickel Acetal Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

439,00 zł

EK Water Blocks EK-FC780 GTX DCII - Acetal+Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC780 GTX DCII is a high performance full-cover water block for engineered specifically for ASUS design GTX 780 DirectCU II series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC780 GTX DCII water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate EK-FC780 GTX DCII Backplate - Black which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC780 GTX DCII water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC780 GTX DCII series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Fittings are not included! Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. - Water block ports does not align with any other EK-FC water block. - The original ASUS factory provided backplate cannot be re-used with this water block! Additional Information. Option Nickel Acetal Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

432,40 zł

EK Water Blocks EK-FC780 GTX DCII - Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC780 GTX DCII is a high performance full-cover water block for engineered specifically for ASUS design GTX 780 DirectCU II series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC780 GTX DCII water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. Base is made of nickel plated electrolytic copper while the top is made of quality Acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate EK-FC780 GTX DCII Backplate - Black which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC780 GTX DCII water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC780 GTX DCII series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Fittings are not included! Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. - Water block ports does not align with any other EK-FC water block. - The original ASUS factory provided backplate cannot be re-used with this water block! Additional Information. Option Nickel Plexi Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

376,38 zł

EK Water Blocks EK-FC R9-290X EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC R9-290X is a high performance full-cover water block for AMD reference design Radeon R9 290X and -290 graphics card. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC R9-290X water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, 0.6mm wide microchannel structure to even further improve the heat transfer. Base is made of electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC R9-290X Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC R9-290X water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC R9-290X series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. Additional Information. Option Copper Plexi Threads G1/4 Chip Manufacturer AMD Radeon

Sklep: Soft-PC.pl

412,90 zł

EK Water Blocks EK-FC R9-290X - Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC R9-290X is a high performance full-cover water block for AMD reference design Radeon R9 290X and -290 graphics card. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC R9-290X water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, 0.6mm wide microchannel structure to even further improve the heat transfer. Base is made of nickel plated electrolytic copper while the top is made of quality acrylic glass material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC R9-290X Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC R9-290X water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC R9-290X series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. Additional Information. Option Nickel Plexi Threads G1/4 Chip Manufacturer AMD Radeon

Sklep: Soft-PC.pl

384,47 zł

EK Water Blocks EK-FC R9-290X - Acetal EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC R9-290X is a high performance full-cover water block for AMD reference design Radeon R9 290X and -290 graphics card. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC R9-290X water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, 0.6mm wide microchannel structure to even further improve the heat transfer. Base is made of electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC R9-290X Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC R9-290X water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC R9-290X series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. Additional Information. Option Copper Acetal Threads G1/4 Chip Manufacturer AMD Radeon

Sklep: Soft-PC.pl

421,21 zł

EK Water Blocks EK-FC R9-290X - Acetal+Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC R9-290X is a high performance full-cover water block for AMD reference design Radeon R9 290X and -290 graphics card. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC R9-290X water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, 0.6mm wide microchannel structure to even further improve the heat transfer. Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC R9-290X Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC R9-290X water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC R9-290X series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. Additional Information. Option Nickel Acetal Threads G1/4 Chip Manufacturer AMD Radeon

Sklep: Soft-PC.pl

szukaj w Kangoo krainaksiazek a song of a single note 20119851

Sklepy zlokalizowane w miastach: Warszawa, Kraków, Łódź, Wrocław, Poznań, Gdańsk, Szczecin, Bydgoszcz, Lublin, Katowice

1. Sklepy z krainaksiazek a song of a single note 20119851

2. Szukaj na wszystkich stronach serwisu

t1=0.093, t2=0, t3=0, t4=0.024, t=0.093