safe card&quo

- znaleziono 116 produktów w 26 sklepach

EK Water Blocks EK-FC780 GTX DCII - Nickel (Original CSQ) - 1990967053

432,40 zł

EK Water Blocks EK-FC780 GTX DCII - Nickel (Original CSQ) EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC780 GTX DCII is a high performance full-cover water block for engineered specifically for ASUS design GTX 780 DirectCU II series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC780 GTX DCII water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. Base is made of nickel plated electrolytic copper while the top is made of quality satin finish Acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate EK-FC780 GTX DCII Backplate - Black which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC780 GTX DCII series water blocks can be interconnected with EK-FC Bridge & Link CSQ system. The EK-FC Link is already enclosed. Enclosed: - EK-FC780 GTX DCII series water block - EK-FC Link - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Fittings are not included! Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. - Water block ports does not align with any other EK-FC water block. - The original ASUS factory provided backplate cannot be re-used with this water block! Additional Information. Option Nickel Plexi Threads G1/4 Prepared for LED Diode 3mm Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

EK Water Blocks EK-FC Titan SE - Acetal+Nickel - 1990967096

435,54 zł

EK Water Blocks EK-FC Titan SE - Acetal+Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC Titan SE is a high performance full-cover water block for nVidia reference (NVA-P2083) design GeForce GTX Titan as well as GTX 780 series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan SE water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer. Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan SE Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the memory IC (GeForce GTX Titan). G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC Titan SE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC Titan series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included. - Water block ports' align with the EK-FC770 GTX as well as EK-FC Titan Additional Information. Option Nickel Acetal Threads G1/4 Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

EK Water Blocks EK-FC Titan SE - Nickel - 1990967097

436,27 zł

EK Water Blocks EK-FC Titan SE - Nickel EK Waterblocks

kategoria nadrzedna nie istnieje

EK-FC Titan SE is a high performance full-cover water block for nVidia reference (NVA-P2083) design GeForce GTX Titan as well as GTX 780 series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan SE water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer. Base is made of nickel plated electrolytic copper while the top is made of quality cast acrylic material. The top also features two pre-drilled slots for 3mm LED diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan SE Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the memory IC (GeForce GTX Titan). G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC Titan SE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC Titan series water block - mounting mechanism with screw-in brass standoffs - thermal pads - thermal grease EK-TIM Ectotherm (1g) Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for EK connectors. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included. - Water block ports' aligns with the EK-FC770 GTX as well as EK-FC Titan Additional Information. Option Nickel Plexi Threads G1/4 Prepared for LED Diode 3mm Chip Manufacturer Nvidia GeForce

Sklep: Soft-PC.pl

Asus SABERTOOTH s2011 X79 8DDR3 RAID/USB3/GLAN ATX - 1990970778

1532,91 zł

Asus SABERTOOTH s2011 X79 8DDR3 RAID/USB3/GLAN ATX Asus

Podzespoły bazowe > Płyty główne > Płyty główne socket - 2011

Opis: Gniazdo procesora LGA 2011 Typ procesora Intel Core i7 Zintegrowany procesor nie Producent chipsetu MB Intel Typ chipsetu Intel

Sklep: Soft-PC.pl

EK Water Blocks EK-FC Titan - Acetal - 1990965725

386,90 zł

EK Water Blocks EK-FC Titan - Acetal EK Waterblocks

Obudowy (wg. producentów) > ANIDEES

Product Description. EK-FC Titan is a high performance full-cover water block for nVidia reference (NVA-P2083) design GeForce GTX Titan series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer. Base is made of electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC Titan water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC Titan series water block - mounting mechanism with screw-in brass standoffs - thermal pads Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included.

Sklep: Soft-PC.pl

EK Water Blocks EK-FC Titan - Nickel - 1990965726

419,00 zł

EK Water Blocks EK-FC Titan - Nickel EK Waterblocks

Obudowy (wg. producentów) > ANIDEES

Product Description. EK-FC Titan is a high performance full-cover water block for nVidia reference (NVA-P2083) design GeForce GTX Titan series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer. Base is made of nickel plated electrolytic copper while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC Titan water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC Titan series water block - mounting mechanism with screw-in brass standoffs - thermal pads Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included.

Sklep: Soft-PC.pl

EK Water Blocks EK-FC Titan - 1990965727

369,00 zł

EK Water Blocks EK-FC Titan EK Waterblocks

Obudowy (wg. producentów) > ANIDEES

Product Description. EK-FC Titan is a high performance full-cover water block for nVidia reference (NVA-P2083) design GeForce GTX Titan series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer. Base is made of electrolytic copper while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC Titan water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC Titan series water block - mounting mechanism with screw-in brass standoffs - thermal pads Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included.

Sklep: Soft-PC.pl

EK Water Blocks EK-FC Titan - Acetal + Nickel - 1990965728

429,00 zł

EK Water Blocks EK-FC Titan - Acetal + Nickel EK Waterblocks

Obudowy (wg. producentów) > ANIDEES

Product Description. EK-FC Titan is a high performance full-cover water block for nVidia reference (NVA-P2083) design GeForce GTX Titan series graphics cards. Please check EK Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, more narrow microchannel structure to even further improve the heat transfer. Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section. G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed. Up to four EK-FC Titan water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. Enclosed: - EK-FC Titan series water block - mounting mechanism with screw-in brass standoffs - thermal pads Made in Slovenia - Europe! PLEASE NOTE: - Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site. - Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance. - Torx T6 screwdriver needed for dissasembly of the factory heatsink/fan solution is also not included.

Sklep: Soft-PC.pl

Monitor Asus 19" VB199T IPS VGA DVI g - 2859320402

726,35 zł

Monitor Asus 19" VB199T IPS VGA DVI g ASUS

Monitory Komputerowe LCD

Czas reakcji matrycy : 5 ms Cz

Sklep: 1001produktów

Monitor Asus 24,5" ROG Strix XG258Q HDMI DP - 2858166428

2073,90 zł

Monitor Asus 24,5" ROG Strix XG258Q HDMI DP ASUS

Monitory > wielkoformatowe

Monitor Asus 24,5" ROG Strix XG258Q HDMI DP Kensington Lock Voltage: 100-240V, 50/60Hz Display Widget Extreme Low Motion Blur GameFast Input technology Czas reakcji matrycy: 1 ms Częstotliwość odchylania pionowego: 48~240 Hz Częstotliwość odchylania poziomego: 255~255 kHz EAN: 4712900808186 Format obrazu: 16:9 Ilość wyświetlanych kolorów: 16,7 M (8-bitowy) Jasność matrycy: 400 cd/m2 Kąt widzenia pionowy (V): 160.00 stopni Kąt widzenia poziomy (H): 170.00 stopni Kod Producenta: 90LM03U0-B01370 Kolor obudowy: Czarny (Black) Kontrast statyczny: 1000 :1 Miejsce serwisowania: Serwis zewnętrzny Montaż VESA: 100 x 100 Normy spełniane przez monitor: BSMI CB CCC CE CU ErP FCC J-MOSS KCC PSE RoHS UkrSEPRO UL/cUL VCCI WEEE WHQL MEPS TUV Flicker-free RCM TUV Low Blue Light Obrót wokół własnej osi [Swivel]: -50° / +50° Obsługa FreeSync: Tak Obsługa G-Sync: Nie Okres rękojmi w miesiącach: 36 Pobór energii (podczas pracy): 65.00 W Pobór energii (tryb czuwania): 0.50 W Przekątna ekranu: 24.50 cali Redukcja migotania [FlickerFree/Safe ]: Tak Regulacja kąta nachylenia (Tilt): -5° / +20° Regulacja wysokości: Tak - 100mm Rozdzielczość maksymalna: 1920 x 1080 pikseli Strona o towarze: http://www.asus.com Touch: Nie Typ matrycy: TN Ustawienie ekranu w pionie [Pivot]: Tak Waga bez podstawy (kg): 3.00 Waga z podstawą (kg): 5.50 Wbudowane głośniki: Nie Wbudowany zasilacz: Nie Wielkość plamki: 0.283 mm Wymiary bez podstawy [S x W x G] (mm): 564.1 x 330.6 x 72.5 Wymiary z podstawą [S x W x G] (mm): 564.2 x (383.7 ~ 503.7) x 253.7 Wyposażenie dodatkowe: Kable: HDMI, zasilajacy, USB, DP Acrylic LED light covers, Support CD, Warranty Card, Quick start guide Zakrzywiony ekran: Nie Zgodność z technologią HDCP: Tak Złącza zewn.: HDMI DisplayPort

Sklep: AZEL-POL